Form Clips
Heavy-gauge steel clips that draw adjacent forming panels tight and keep them aligned through the pour, so walls come out straight and seams stay closed. Fast to set, quick to strip, and built to be reused pour after pour.
Products & Services
What we supply
Commercial and residential concrete construction products, manufactured and distributed with over 20 years of industry expertise behind every order.
Product Lineup
Built for the pour
From the forms to the finish — the concrete hardware crews order by the pallet, grouped by where it works on the job.
Concrete Forming
X-Flat Ties
Flat steel ties that set your wall thickness and hold plywood forms against the outward pressure of wet concrete. They drop in with wedge bolts for fast setup and leave a clean 1/4-inch break-back once the wall cures — rated to a 3,000 lb safe working load.
Round End Full Ties
Flat steel form ties with rounded, pre-punched ends that lock into wedge-and-pin forming and hold your panels at a set wall thickness. The looped ends spread the load and resist the outward push of wet concrete, so walls come out true from the first lift to the last.
Flat Stacking Ties
Flat steel ties built for stacked, prefabricated wall forms — the notched body seats into the panel rails and pins in place so forms stack tight and plumb, lift after lift. Light and fast to set for repetitive wall work where forms go up and come down all day.
Steel Stakes
Pointed steel stakes with pre-punched nail holes that anchor your forms for slabs, driveways, sidewalks, curbs, and footings. The sharp tip drives into hard-packed ground and holds the line dead straight while concrete sets — then pulls for reuse.
Reinforcing Steel
Prefab Rebar Uprights
Ready-to-set, pre-bent rebar uprights that drop straight into footings and foundations — no field bending, no wasted stick. Cut and bent to spec in-house and stocked in the sizes crews reach for most, plus straight dowels for slabs and cold joints.
36"×6"
30"×6"
24"×6"
18"×6"
2' Dowel
16.5 Gauge Tie Wire
Black annealed 16.5-gauge tie wire that ties off rebar intersections fast and holds the mat square through the pour. Soft enough to twist clean by hand or with a spinner, strong enough to keep steel from shifting — sold in job-ready coils that load right onto a reel.
Fasteners & Anchoring
Duplex Nails
Double-headed nails made for temporary work — form panels, wall bracing, and scaffolding. The lower head drives flush while the second head stays proud, so they pull out fast and clean and keep your form lumber intact for the next job.
Anchor Bolts
Hot-dip galvanized L-shaped anchor bolts that cast into fresh concrete to tie down sill plates, posts, and column bases. The bent leg keys into the pour for real holding power, and each ships ready to set with nut and washer — so once the concrete cures, the connection is locked.
Site & Weather
Poly Sheeting
Woven poly sheeting for weather protection, vapor barriers, and job site coverage.
Concrete Blankets
Insulated tarps designed primarily for winter use, protecting curing concrete from freezing temperatures so job sites stay productive year-round.
Rhino Concrete Washout
An all-weather, collapsible concrete washout that keeps rinse water and leftover mud off the ground — and keeps you on the right side of EPA rules. It folds flat to haul and store, pops open to a self-standing tub on site, and shrugs off heat, cold, and whatever the weather throws at it.
Services & Add-ons
Beyond the product
Support and options that make Armour easier to order from — and easier to put your own name on.
Add-on Service
Private Labeling
Put your brand on the box. We custom print corrugated shipping cartons with your logo on every panel, so each shipment shows up as yours — with no extra step on your end.
Dedicated Account Support
Knowledgeable sales and customer service teams you can rely on before, during, and after the sale.
Nationwide Distribution
Efficient distribution of commercial and residential concrete construction products, wherever your job site is.